Sometimes people call it a regular boiler. What it does is that it directly provides heat to the central heating system and then it produces hot water in your cylinder. These are very common in old flats and buildings especially in Europe and in the US. If you have an old-model boiler in your house, chances are you will be replacing it with a conventional boiler whenever you want to replace it. The hot water system is connected to an isolated hot water cylinder, while it also requires cold storage tank usually placed in the attic to feed the hot water cylinders.
Please see the video below which explains more about conventional boilers:
What is a combination boiler?
Normally called as “combi boiler”, it is a highly efficient water heater and functions as central heating at the same time. In short, it is a single compact unit that heats the water when you take a bath and heats your room to keep the temperature warm at night.
There is some more information on both conventional and combination boilers on the uswitch.com website.
Advantage and disadvantages
The best thing about combi boilers is that they are suited for homes with limited space. Usually, modern houses apply modular equipment to their homes to save space to provide enough mobility for people inside the house. Combi boilers are suited for couples living in apartments or small families who want to maximize the space in their humble abode. Aside from compact sizes, combi boilers do not require cold water tank storage and hot water cylinders. However, installation of this new model might be a bit expensive compared to the regular type. Usually, combi boilers are made of high-tech components which require higher maintenance cost.
On the other hand, regular boilers are commonly used in many households and buildings because they are much cheaper to install. One great benefit of using conventional boilers is that you can get hot water from several sources simultaneously without any pressure loss because of the large hot water storage. Regular boilers are suitable for buildings that use a lot of water and have enough space for its installation. It is also compatible with solar water heating systems and promotes low carbon footprint as well as low energy costs. However, you will have to install a hot water tank and cold water tank which eat up more space. Moreover, you always have to switch on the immersion heater to refill the water. Since you are storing hot water, considerable heat will be lost from the hot water cylinder.
In conclusion, both boilers offer advantages and disadvantages. The key to using the boiler suitable for your home is its use. Make sure to check your requirements before deciding which one to use.
Having issues with plumbing means having to deal with some of the most mind-bending and intricate problems to plague a household. Plumbing is internal, meaning that the affected areas are out of reach and located in places which cannot be easily accessed. While some measure of “do-it-yourself” can be done to deal with plumbing issues, many problems will need to be solved by hiring a professional utility person who has experience and knows the ins and outs of the piping system. A plumbing contractor is someone who can deal with these types of issues. They can provide a supply of safe and clean water, ensure that it is the proper temperature, and also that all waste disposal is being properly funneled outside the house. If you are in a bind and need to hire a plumbing contractor, here are eight things to consider before doing so:
Rate (Hourly or Flat)
Hour of Payment
Identifying the Plumber
It may not seem like that big of an issue, but trust me – not having a license is huge. Without one, a plumbing contractor is operating illegally within their state. Never assume that a plumber has a license just because he seems knowledgeable or proficient. Many operate without one, so make sure to ask them first. You may have encountered some plumbers who give free estimates – in most cases; these are okay to take advantage of. However, there are instances in which you never want to entertain them, such as a free estimate offer over the phone. The plumber should always visit the house so they can survey damages and the assess the housing situation before attempting to provide an estimate.
Before you sign your soul over to the devil (so to speak), keep a few things in mind. First, carefully read the contract which will determine the terms and conditions of the contractual work. Pay careful attention especially to payments rendered for services, damage claims, and any other fine print which they occasionally do include. The last thing you want is for a plumber to promise to come back with additional parts needed to complete the repair, and then for him to never show up. Hopefully, you will also find useful these eight things to consider before hiring a plumbing contractor.
Have you ever experienced a plumbing problem? Sewage and plumbing maintenance can be a thorn in anyone’s side, especially for those who live in older, more tenured houses. Plumbing problems usually arise when main pipes get clogged up with debris and waste materials, which cause the pipe to overload and instead of exiting, the waste gets backed up and deposits from where it entered. Bad or faulty plumbing can cause a lot of sticky situations – literally and figuratively. The hassle involved with cleaning and/or having the blocked pipe cleared out is more than most people can bear. It may also involve heavy costs to hire a maintenance man, plumber, or local utilities expert to fix the problem. What are you going to do if ever you have an emergency plumbing problem? Read on to find out!
Perform Immediate Surgery
No, we don’t mean literal surgery. We mean that before the body heals, you need to patch it up – stop the bleeding, sew up the wounds, let the organs stabilize, etc. In the same sense, before you immediately try to figure out the root cause of the problem, try to fix any imminent issues which are occurring. If a pipe or drain is leaking, turn off the main water system so the flow stops – this will save you money, time, and effort. It also prevents you from getting all wet and things getting messy when doing testing. Once the bleeding has stopped, you are ready to begin surgery.
Do Root Cause Analysis
Find out the reasons why and how the plumbing problem started in the first place. If you need to inspect certain areas of the house or piping system, do it as soon as possible. Any delay will only make the problem worse. Monitor water pressure and check for any additional leaks by letting the water flow and checking if any additional droplets or condensation is forming in any obvious areas.
Attempt to fix the immediate issue by stopping the leak or removing any waste which is blocking drainage. Use duct tape or any temporary measures. If an issue is too severe to be fixed on your own, consider contacting a professional plumber or utilizing plumbing/disposal systems. There are many companies which can you set you up with an appointment for a maintenance check and/or repair on your piping.